Ricoh Ri 100 Operating Instructions Manual page 158

6. Monitoring and Configuring the Machine
[Interface] area
• [Interface Settings] page
• [Ethernet]
You can specify [Ethernet Speed].
• [Wireless LAN Settings] page
• [Wireless LAN Settings]
You can specify [SSID] and [Security Method].
• [WEP Settings]
You can specify [New WEP Key] and [Confirm WEP Key].
• [WPA Settings]
You can specify [WPA Encryption Method], [WPA Authentication Method], [PSK],
[Confirm PSK], [User Name], [EAP Type], [Password], and [Confirm Password].
• [Firmware Update]
You can update the wireless LAN firmware as necessary.
Download the latest update from the manufacturer's website and update the firmware
according to the displayed instructions.
[Network] area
• [IPv4] page
You can specify whether to enable or disable [IPv4].
• [Ethernet + Wireless LAN]
You can specify [Host Name], [DHCP], [Notify Host Name to DHCP Server], [Domain
Name], [Use Domain Name], [IPv4 Address], [Subnet Mask], and [AutoIP].
• [Details]
You can specify [Default Gateway Address], [DNS Server1], [DNS Server2], [DNS
Protocol Priority], [LPR(515)], [DIPRINT(9100)], [IPP(80/631)], [WSD (Device)], [WSD
(Device) Port Number], [WSD (Printer)], [WSD (Printer) Port Number], [WSD (Printer) /
IPP Timeout], and [LLTD].
• [IPv6] page
You can specify whether to enable or disable [IPv6].
• [Ethernet + Wireless LAN]
You can specify [Host Name], [Domain Name], [Stateless Address Autoconfiguration],
and [Manual Configuration Address].
• [Details]
You can specify [Default Gateway Address], [DNS Server1], [DNS Server2], [DNS
Protocol Priority], [LPR(515)], [DIPRINT(9100)], [IPP(80/631)], [WSD (Device)], [WSD
156