Maintaining Your Machine; Cleaning The Main Frame - Ricoh Priport JP5500 Operating Instructions Manual

Remarks

Maintaining Your Machine

To maintain high print quality, clean
the following parts and units regular-
ly.
❖ ❖ ❖ ❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then wipe it with a
dry cloth to remove the water.
Important
❒ Do not use chemical cleaner or or-
ganic solvents, such as thinner or
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.
❒ Do not clean parts other than those
specified in this manual. Such
parts should be cleaned by your
6
service representative.

Cleaning the Main Frame

Cleaning the exposure glass
A A A A
Lift the exposure glass cover or
document feeder.
B B B B
Clean A A A A and B B B B .
208
Cleaning the exposure glass cover
A A A A
Lift the exposure glass cover.
B B B B
Clean the exposure glass cover
with a damp cloth and wipe it
with a dry cloth.
Note
❒ If you do not clean the exposure
glass cover, marks on the cover
will be printed.
Cleaning the paper feed roller (Paper
feed tray)
A A A A
Wipe dust off the paper feed roll-
er with a damp cloth, and then
wipe it with a dry cloth.
Note
❒ If you do not clean the paper
feed roller, paper misfeeds tend
to occur.