Demand - GE 750 Instruction Manual

A2 METERING
6.3.8

Demand


DEMAND

PHASE A
CURRENT

LAST RESET
6 - 16
Main Menu

PATH: ACTUAL VALUES

[] PHASE A
CURRENT

PHASE B
MESSAGE
CURRENT

PHASE C
MESSAGE
CURRENT

REAL POWER
MESSAGE

REACTIVE POWER
MESSAGE

APPARENT POWER
MESSAGE

LAST RESET
MESSAGE
The relay measures current demand on each phase, and average three phase demand for
real, reactive, and apparent power. These parameters can be monitored to reduce supplier
demand penalties or for statistical metering purposes. Demand calculations are based on
the measurement type selected under
relay displays the demand over the most recent demand time interval, the maximum
demand since the last maximum demand reset, and the time and date stamp of this
maximum demand value. Maximum demand quantities can be reset to zero with the

RELAY SETUP CLEAR DATA
Phase A Current Apparent Power demand
to

PATH: ACTUAL VALUES
[] LAST PHASE A CURRENT
DEMAND:
MAX PHASE A CURRENT
MESSAGE
DEMAND:
LAST PHASE A CURRENT
MESSAGE
DATE: Mar 16 1997
LAST PHASE A CURRENT
MESSAGE
TIME: 16:30:00
The actual values for Phase A Current Demand are shown above. The actual values
displays for Phase B Current, Phase C Current, Real Power, Reactive Power, and Apparent
Power Demand are similar to those above.
Last Reset Date

PATH: ACTUAL VALUES
[] DEMAND DATA LAST
RESET: Mar 16 1997

A2 METERING DEMAND
[]
[]
[]
[]
[]
[]
[]
S6 MONITORING

CLEAR MAX DEMAND DATA

A2 METERING DEMAND
0 A
0 A

A2 METERING DEMAND
750 FEEDER MANAGEMENT RELAY – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
See page 6–16
See page 6–16
See page 6–16
See page 6–16
See page 6–16
See page 6–16
See page 6–16
. For each quantity, the

DEMAND
setpoint command.

PHASE A CURRENT(APPARENT PWR)
Range: 0 to 65535 A
Range: 0 to 65535 A
Range: Date in format shown
Range: Time in format shown

LAST RESET DATE
Range: Date in format shown
S1