CHANGING SETPOINTS
1.3.6
Text Setpoints
1 - 14
The output relay setpoint values are represented by a 1-row, 5-column matrix. For
example, a value of 3---7 activates Auxiliary Relays 3 and 7, while a value of 34567
activates all five auxiliary relays.
Text setpoints accept user-defined character strings as values. They may be comprised of
upper case letters, lower case letters, numerals, and a selection of special characters. The
editing and storing of a text value is accomplished with the use of the
keys.
ESCAPE
For example:
Move to message
NAME
The name of this user defined input will be changed in this example
from the generic User Input A to something more descriptive.
If an application is to be using the relay as a substation monitor, it is
more informative to rename this input Substation Monitor. Press the
ENTER
position.
Press the
position.
Now press the
cursor to the next position.
Change the second character to a u in the same manner.
Continue entering characters in this way until all characters the text
Substation Monitor are entered.
Note that a space is selected like a character. If a character is
entered incorrectly, press the
returns to the position of the error. Re-enter the character as
required.
Once complete, press the
cursor and view the result. Once a character is entered by pressing
the
ENTER
setpoint.
S3 LOGIC INPUTS USER INPUT A USER INPUT A
setpoint message.
USER INPUT A NAME:
User Input A
key and a solid cursor () will appear in the first character
USER INPUT A NAME:
ser Input A
keys until the character S is displayed in the first
VALUE
key to store the character and advance the
ENTER
ENTER
MESSAGE
key, it is automatically saved in flash memory as a new
USER INPUT A NAME:
Substation Monitor
750 FEEDER MANAGEMENT RELAY – INSTRUCTION MANUAL
CHAPTER 1: GETTING STARTED
,
ENTER
VALUE
key repeatedly until the cursor
key to remove the solid
, and