GE 750 Instruction Manual page 63

GE
Digital Energy
3.1.1 Drawout Case
750 FEEDER MANAGEMENT RELAY – INSTRUCTION MANUAL
750/760 Feeder Management
Chapter 3: Installation
Installation
3.1 Mechanical Installation
The 750/760 is packaged in the standard SR series arrangement which consists of a
drawout relay and a companion case. The case provides mechanical protection for the
drawout portion and is used to make permanent electrical connections to external
equipment. Where required, case connectors are fitted with mechanisms, such as
automatic CT shorting, to allow the safe removal of the relay from an energized panel.
There are no electronic components in the case.
To prevent unauthorized removal of the drawout relay, a wire lead seal can be installed
through the slot in the middle of the locking latch. With this seal in place, the relay cannot
be removed. Even though a passcode or setpoint access jumper can be used to prevent
Relay
FIGURE 3–1: Case Dimensions
3 - 1