A1 Status - GE 750 Instruction Manual

A1 STATUS

6.2.1 Virtual Inputs

VIRTUAL INPUTS
6.2.2 Hardware
Inputs

HARDWARE
INPUTS
6 - 6
6.2 A1 Status

PATH: ACTUAL VALUES A1 STATUS
[] 2 VIRTUAL INPUTS
ARE ACTIVE
Logic Input 1
Off
The state of all active virtual inputs as well as the ability to set their state is displayed here.
In some applications, these displays can be used instead of panel switches for controlling
operations within the relay. The ability to have user defined names for the inputs allows
the operator interface to be easily understood. See S3 Logic Inputs on page 5–26 for
complete details on virtual inputs, their setpoints and application.
The first value displays how many logic inputs have a virtual condition selected as part of
their asserted logic. The states of Virtual Inputs 1 through 20 are displayed in this menu.
The Logic Input 1 display heading is user-programmable. Note that only 'active' virtual
inputs are displayed; active virtual inputs are those that have their
setpoint programmed to monitor the state of the virtual input. There are
LOGIC
subsequent displays for the remaining virtual inputs.

PATH: ACTUAL VALUES A1 STATUS
[] CONTACT 1 STATE:
Open
CONTACT 2 STATE:
MESSAGE
Open
CONTACT 14 STATE:
MESSAGE
Open
SETPOINT ACCESS
MESSAGE
STATE: Restricted
Trip Coil Monitor
MESSAGE
STATE: Open
Close Coil Monitor
MESSAGE
STATE: Open
These messages display the state of all hardware inputs. The top line in the last two values
above reflect the names programmed in the

MONITOR 1 COIL 1 MON NAME

VIRTUAL INPUTS
Range: 0 to 20 Virtual Inputs
Range: On, Off. Reflects the user-

HARDWARE INPUTS
Range: Open, Closed
Range: Open, Closed
↓
Range: Open, Closed
Range: Restricted, Allowed
Range: Open, Closed
Range: Open, Closed
S6 MONITORING
and setpoints, respectively.
COIL 2 MON NAME
750 FEEDER MANAGEMENT RELAY – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
programmed name.
INPUT N ASSERTED
 
EQUIPMENT COIL