GE 750 Instruction Manual page 105

CHAPTER 4: INTERFACES
Note
NOTE
750 FEEDER MANAGEMENT RELAY – INSTRUCTION MANUAL
4. The Front Panel settings window will open with a corresponding status indica-
tor on the lower left of the EnerVista 750/760 Setup window.
5. If the status indicator is red, verify that the serial or Ethernet cable is properly
connected to the relay, and that the relay has been properly configured for
communications (steps described earlier).
The Front Panel settings can now be edited, printed, or changed according to user
specifications. Other setpoint and commands windows can be displayed and edited in a
similar manner. Actual values windows are also available for display. These windows can
be locked, arranged, and resized at will.
Refer to the EnerVista 750/760 Setup Help File for additional information about the
using the software.
CONNECTING ENERVISTA 750/760 SETUP TO THE RELAY
4 - 21