GE 750 Instruction Manual page 111

CHAPTER 4: INTERFACES
750 FEEDER MANAGEMENT RELAY – INSTRUCTION MANUAL
Printing Setpoints and Actual Values
The EnerVista 750/760 Setup software allows the user to print partial or complete lists of
setpoints and actual values. Use the following procedure to print a list of setpoints:
1. Select a previously saved setpoints file in the File pane or establish communications
with a 750/760 device.
2. From the main window, select the File > Print Settings menu item.
3. The Print/Export Options dialog box will appear. Select Settings in the upper section
and select either Include All Features (for a complete list) or Include Only Enabled
Features (for a list of only those features which are currently used) in the filtering
section and click OK.
4. The process for File > Print Preview Settings is identical to the steps above.
5. Setpoints lists can be printed in the same manner by right clicking on the desired file
(in the file list) or device (in the device list) and selecting the Print Device Information
or Print Settings File options.
A complete list of actual values can also be printed from a connected device with the
following procedure:
1. Establish communications with the desired 750/760 device.
2. From the main window, select the File > Print Settings menu item.
3. The Print/Export Options dialog box will appear. Select Actual Values in the upper
section and select either Include All Features (for a complete list) or Include Only
Enabled Features (for a list of only those features which are currently used) in the
filtering section and click OK.
Actual values lists can be printed in the same manner by right clicking on the desired
device (in the device list) and selecting the Print Device Information option.
Loading Setpoints from a File
An error message will occur when attempting to download a setpoint file with a
revision number that does not match the relay firmware. If the firmware has been
upgraded since saving the setpoint file, see Upgrading Setpoint Files to a New Revision
on page 4–26 for instructions on changing the revision number of a setpoint file.
The following procedure illustrates how to load setpoints from a file. Before loading a
setpoints file, it must first be added to the EnerVista 750/760 Setup environment as
described in Adding Setpoints Files to the Environment on page 4–24.
WORKING WITH SETPOINTS AND SETPOINT FILES
4 - 27