GE 750 Instruction Manual page 96

ENERVISTA 750/760 SETUP SOFTWARE INTERFACE
4.4.1 Overview
4.4.2 Hardware
4 - 12
4.4 EnerVista 750/760 Setup Software Interface
The EnerVista 750/760 Setup software provides a graphical user interface (GUI) as one of
two human interfaces to a 750/760 device. The alternate human interface is implemented
via the device's faceplate keypad and display (see the first section in this chapter).
The EnerVista 750/760 Setup software provides a single facility to configure, monitor,
maintain, and trouble-shoot the operation of relay functions, connected over serial
communication networks. It can be used while disconnected (i.e. off-line) or connected (i.e.
on-line) to a 750/760 device. In off-line mode, settings files can be created for eventual
downloading to the device. In on-line mode, you can communicate with the device in real-
time.
This no-charge software, provided with every 750/760 relay, can be run from any
computer supporting Microsoft Windows
of the basic EnerVista 750/760 Setup software interface features. The EnerVista 750/760
Setup Help File provides details for getting started and using the software interface.
With the EnerVista 750/760 Setup running on your PC, it is possible to:
• Program and modify setpoints
• Load/save setpoint files from/to disk
• Read actual values and monitor status
• Perform waveform capture and log data
• Plot, print, and view trending graphs of selected actual values
• Download and playback waveforms
• Get help on any topic
Communications from the EnerVista 750/760 Setup to the 750/760 can be accomplished
three ways: RS232, RS485, and Ethernet communications. The following figures below
illustrate typical connections for RS232, RS485, and Ethernet communications.
CHAPTER 4: INTERFACES
®
95 or higher. This chapter provides a summary
750 FEEDER MANAGEMENT RELAY – INSTRUCTION MANUAL