Network Status; Verify Operation - Emerson Rosemount 2051 Wireless Series Reference Manual

Section 4: Commissioning
June 2012
4.2

Network Status

If the Rosemount 3051 Wireless was configured with the Network ID and Join Key and sufficient
time for network polling has passed, the transmitter should be connected to the network. To
verify connectivity, open the Smart Wireless Gateway's integral web interface and navigate to
the Explorer page.
This page will display the transmitter's HART tag, PV, SV, TV, QV, and Update Rate. A green
status indicator means that the device is working properly. A red indicator means that there is a
problem with either the device or its communication path. For more detail on a specific device,
click on the tag name.
4.3

Verify Operation

Operation can be verified in three locations, at the device via the Local Display, using the Field
Communicator, or at the Smart Wireless Gateway's integrated web interface.
Local Display
The LCD will display the PV value at the same rate as the configured update rate, but no faster
than once every 60 seconds. Press the Diagnostic button to display the TAG, Device ID, Network
ID, Network Join Status and Device Status screens.
For Device Status screens, see
48
"LCD Screen Messages" on page
Reference Manual
00809-0100-4100, Rev AA
57.
Commissioning