Commissioning
September 2019
4.3
Network status
If the Rosemount
key and sufficient time has taken place for network polling, the transmitter should be
connected to the network. To verify connectivity, open the Wireless Gateway's integral
web interface and navigate to the explorer page.
Figure 4-1: Wireless Gateway Explorer Page
Note
It may take several minutes for the device to join the network.
This page displays the transmitter's HART tag, PV, SV, TV, QV, and Update Rate. If the
device and sensors are working properly, a green status indicator is present for HART
status. A red indicator means there is a problem with either the device, a sensor, or the
communication path. If Not Used has been selected for a sensor, a yellow indicator is
shown. For more information on a specific device, click on the tag name.
4.4
Verify operation
Operation can be verified using one of three methods: Field Communicator, the Wireless
Gateway's integrated web interface, or using AMS Wireless Configurator.
Field Communicator
For HART communication, an 848T Wireless DD is required. For connecting with a Field
Communicator, refer to
Function
Communications
38
™
848T Wireless Transmitter was configured with the network ID and join
Figure
3-3.
Key Sequence
Menu Items
3, 3
Join Status, Communications Status, Join Mode, Number of
Advertisements Heard, Number of Available Neighbors,
Number of Join Attempt
Reference Manual
00809-0100-4848
Emerson.com/Rosemount