Conference Calls; Local Conference; Network Conference - Yealink DD Phone User Manual

3.
4. Do one of the following:
• When you hear the ringback tone, press the Transfer soft key to finish a semi-attended transfer.
• After the contact answers the call, press the Transfer soft key to finish an attended transfer.

Conference Calls

During the conference, follow these tips:
• Mute your microphone when you are not speaking, especially in noisy environments.
• Avoid tapping or rustling papers near the microphone.
• Speak in your normal voice without shouting.

Local Conference

Setting Up a Local Conference Call
You can set up a local conference call with up to two contacts.
1. Place a call to the first party.
2. When the first party answers the call, select Conference.
The active call is placed on hold.
3. Dial the second party's number.
4. When the second party answers the call, select Conference to invite two parties to join the conference.
Muting/Unmuting a Conference Call
When you mute the local microphone during a conference call, other participants can hear each other except you.
1.
Press the MUTE key
2.
Press the MUTE key
Ending a Conference Call
You can end the current conference call at any time.
Press or End Call.

Network Conference

If your system administrator has set a network conference feature on your phone, you can initiate a conference with
two or more contacts.
Setting Up a Network Conference
You can set up a network conference with two or more contacts.
1. Place a call to the first party.
2. Select Conference.
The active call is placed on hold.
3. Dial the second party's number.
4. When the second party answers the call, select Conference to add the second party to the conference.
5. Select Conference to place a new call.
The conference call is placed on hold.
6. Enter the number of the new party, and then press the OK key.
7. When the new party answers the call, select Conf to add the new party to the conference.
to mute the conference.
again to unmute the conference.
| Call Features | 17