Problems Locating The Domain Controller In Windows (Smb) - Axis StorPoint NAS 100 User Manual

Appendix B: Troubleshooting
94

Problems Locating the Domain Controller in Windows (SMB)

Web Browser
Local Administrator
Account
If there is a problem locating the primary domain controller when using
user-level security mode in Windows (SMB), all users will be denied
access to the StorPoint NAS.
You can verify the configuration settings from the StorPoint NAS web
interface. Within the Administration Web pages, click Network
Settings, Detailed View, and open the Windows (SMB) tab to do that.
In Windows NT, you can correct the problem by logging on to the
StorPoint NAS as local administrator. Note that the local administrator
is not the same as an Administrator with an account on the domain.
In the Map Network Drive dialog, specify the following:
Path:
Connect as: Server name\Administrator
Password:
Example:
The host name of the StorPoint NAS is
Path:
Connect as:
❏ In Windows 95, you cannot tell the SMB client to change domain
Note:
and user when you are already logged in. Therefore, you cannot use
the local administrator account to solve domain problems in the
Windows 95 environment.
StorPoint NAS 100 User's Manual
The StorPoint NAS name
The password set in the
ServerPassword parameter
\\hdserv\root
hdserv\Administrator
.
hdserv