Axis StorPoint NAS 100 User Manual page 39

StorPoint NAS 100 User's Manual
[NetWare]
NDSEnable = yes
NDSTreeName =
NDSServerContext =
NDSAdminName =
NDSAdminPassword =
NDSInstall = install
NDSRightsStorage = NDS
NDSRightsFile =
TimeSyncSources = SAP
Section 4: NetWare (NCP)
Must be set to yes to enable the NDS login.
The name of the tree where you want to install the
StorPoint NAS, e.g. MEDCORP
The distinguished name of the context in the NDS tree
where you want to install the StorPoint NAS, e.g.
Manufacturing.Medtec
The distinguished name of a user or administrator with
Supervisor or Create rights to the context where you
want to install the StorPoint NAS, e.g. Admin.Medtec
The password of the administrator entered in
NDSAdminName shown above. Once written, this
password will appear as ******.
Change this to install when you are ready to install the
StorPoint NAS. Forced will overwrite the existing
server object without warning.
Set to NDS to store the access rights in the NDS tree.
Set to File to store the access rights in a file on the
Novell server. This is necessary if you do not allow
schema extensions in your NDS tree, or if you do not
have Supervisor access rights.
If storing the access rights in a file on the Novell file
server, specify the whole path to the file, e.g.
CORPSERVER/SYS:NASSERVER/NASSRV.DAT
The specified directory must exist and the StorPoint
NAS must have Read, Write, Create, Erase, Modify and
File Scan rights. The StorPoint NAS will create the file
once you start adding trustees.
Default is SAP for the network agreed time.
Alternatively, enter the server names to be contacted
for time synchronization.
39