Configuration Settings - Axis StorPoint NAS 100 User Manual

StorPoint NAS 100 User's Manual
Text Editor
Important!

Configuration Settings

Access Control
Parameters
If you do not have TCP/IP on your network, you can edit the StorPoint
NAS parameter list and access control parameters via the text files. Use
your preferred text editor to make updates to the files.
You submit the new settings to the StorPoint NAS by simply saving the
files. To activate the new settings it is necessary to restart the StorPoint
NAS. You can do this by setting the Restart parameter to
❏ Do not restart the StorPoint NAS in the middle of the NDS
installation.
The StorPoint NAS configuration settings are stored in the
file located in the
System/ServerProperties
Example:
; AXIS StorPoint NAS Parameter List, V1.00
[Server]
HardwareAddress
Date
Time
FactoryDefaults
Restart
TimeZone
TimeSyncSource
ServerPassword
Cache
Clear Cache
[SCSI]
SCSITermination
JukeBoxLockTime
Disconnect_Reselect
BusMode
[IP]
InternetAddress
DefaultRouter
NetMask
BOOTPEnable
DHCPEnable
RARPEnable
...
The StorPoint NAS access control parameters are stored in separate text
files for each shared resource. These text files are located in the
System/VolumeProperties
Appendix A: Parameter List
= 00:40:cc:24:c3:0c
= 98-12-02
= 08:54:37
= no
= no
= UTC
= None
= ********
= normal
= no
= on
= 0
= on
= Asynchronous
= 192.16.253.80
= 192.16.1.1
= 255.255.0.0
= yes
= yes
= yes
folder.
.
yes
config.ini
folder.
83