StorPoint NAS 100 User's Manual
Section 5
Notes:
UNIX (NFS)
This section outlines the required configuration settings for running the
StorPoint NAS in the UNIX (NFS) environment and how to set up
access restrictions.
❏ Make sure you have set the Internet address as described in
"Assigning an IP Address" on page 13.
❏ The NFS protocol is disabled by default.
If you are using the StorPoint NAS in a multiprotocol environment,
proceed to the other relevant sections of the manual, namely:
•
"Section 3 - Microsoft & IBM Networks (SMB)"
•
"Section 4 - NetWare (NCP)"
•
"Section 6 - FTP"
•
"Section 7 - Web Browser (HTTP)"
Section 5: UNIX (NFS)
47