Axis StorPoint NAS 100 User Manual page 75

StorPoint NAS 100 User's Manual
Parameter name
DefaultRouter
NetMask
BOOTPEnable
DHCPEnable
RARPEnable
DomainName
PrimaryDNS
SecondaryDNS
NTPServer
EnableWINS
PrimaryWINSserver
SecondaryWINSserver
[HTTP]
HTTPEnable
EnableMediaAccess
ExternalLink
ExternalImage
[FTP]
FTP User name
FTP User password
Timeout in seconds
FTP Max Users
[SMB]
SMBEnable
ServerPassword
Domain/GroupName
ServerComment
SecurityMode
Value
= 0.0.0.0
= 0.0.0.0
= yes
= yes
= yes
=
= 0.0.0.0
= 0.0.0.0
= 0.0.0.0
= no
= 0.0.0.0
= 0.0.0.0
= yes
= yes
=
=
=
=
= 0
= 10
= yes
= pass
=
=
= shareLevel
Appendix A: Parameter List
Description
The IP address for the default router. All traffic directed
outside the local network (according to the NetMask) is
sent to the default router. Any re-routing via other routers
is done automatically. The default 0.0.0.0 indicates that no
default router is set.
Used to determine when the traffic should be sent via a
router. For example, the normal class C mask is
255.255.255.0. The default 0.0.0.0 indicates that automatic
router sensing is used.
Enables BOOTP IP address setup.
Enables DHCP IP address setup.
Enables RARP IP address setup.
Name of the domain to which the StorPoint NAS belongs.
The IP address of the primary DNS server. Used for
identifying computers with names instead of IP addresses.
The IP address of the secondary DNS server.
Name or IP address for the NTP server.
Enables WINS over NetBIOS/TCP/IP.
The IP address of the primary WINS server.
The IP address of the secondary WINS server.
Enables HTTP. Set to no to restrict users from accessing the
StorPoint NAS from a Web browser.
Enables access to the attached resources. When set to no,
only administration is available from HTTP.
Specifies the URL to a customized link, e.g. to your
company's Web site. The link will be available from the
StorPoint NAS Web interface.
Specifies the URL to the image that will indicate the
customized external link.
The user name for non-administrator FTP log in.
The password for non-administrator FTP log in.
WARNING: If FTP user is specified, the user will get access
to the volumes folder and no access restrictions will apply.
Enables SMB.
The Supervisor, Administrator or Root user password used
for basically all protocols; i.e. HTTP, NetWare bindery,
SMB user level, SNMP and FTP. Once written into the
configuration file, the password will not be shown but
replaced with eight *'s, representing the password.
Name of the StorPoint NAS workgroup in SMB. If not
specified, the StorPoint NAS will appear in the folder that
comes first in alphabetical order.
Optional entry which should be in plain text.
Specifies the security mode used in SMB: userLevel or
shareLevel.
75