Error Conditions - Axis StorPoint NAS 100 User Manual

StorPoint NAS 100 User's Manual

Error Conditions

Status Indicator Red
This table shows various error conditions:
Event
New firmware required. .
Illegal serial number.
Error in Flash PROM.
Error in DRAM.
Error in DRAM expansion
module.
Fatal SCSI error.
Drive disconnected or not
working properly.
The network connection
is down.
* Flashing, short interval.
** Flashing, long interval.
If the Status indicator turns red, this indicates a serious error in the
hardware. If this happens, contact your dealer and return the unit for
replacement.
Appendix B: Troubleshooting
Action
Flash loading via FTP
possible
Return unit.
Return unit.
Return unit.
Replace DIMM
module.
Return unit.
Check SCSI
connection.
Check network
cabling, use another
port to the hub.
Status SCSI Network
LED LED
AMBER
**
RED *
RED **
RED **
RED /
AMBER
RED
RED *
87
LED
RED