Axis StorPoint NAS 100 User Manual page 103

StorPoint NAS 100 User's Manual
Installation Procedure
Caution!
Appendix C: Upgrading the StorPoint NAS
Follow these steps to add the memory module:
1. Unplug the power supply from the StorPoint NAS.
2. Remove the server casing.
3. Mount the memory module by sliding it into the X4 socket at an angle
of 45 degrees. Once the module is fully inserted, press it downwards
towards the PCB, until the socket locks the module into place.
❏ Always use an antistatic bracelet when handling the memory
modules.
4. Replace the server casing.
5. Power up the StorPoint NAS. The new memory module is
automatically identified and the usage optimized by the StorPoint
NAS.
Front
Position X4
103