Axis StorPoint NAS 100 User Manual page 24

Section 2: Basic Installation
24
Server Password
❏ You can prevent users from accessing the volumes via the Web
Notes:
interface by disabling the Enable access to volumes via Web browser
(HTTP) parameter on the Network Settings - Web (HTTP) page.
❏ Context sensitive online help is available from all the StorPoint
NAS Web pages. To access help for a specific page, click Help
To protect the system files, it is important that you set the Server
password. The Server password is used in basically all protocols, i.e.
HTTP, NetWare (NCP), Windows (SMB) and SNMP. For example, a
user will be prompted for the Server password when trying to access the
Administration Web pages for the first time during a session.
To set the Server password, follow these steps:
1. On the This StorPoint page, click Settings to open the Server
Settings dialog box.
2. Select the General tab.
3. Specify and confirm the Server password.
4. Click Close.
❏ If you lose the Server password, you must restore the factory default
Note:
settings. See "Restoring Factory Default Settings " on page 88.
StorPoint NAS 100 User's Manual
.