Axis StorPoint NAS 100 User Manual page 38

Section 4: NetWare (NCP)
38
Text Editor
6. Choose NetWare (NCP) to set up the StorPoint NAS for your
NetWare clients. Click Start to proceed with the installation.
7. Follow the instructions on the screen. When finished, click Close.
8. Click Detailed View
9. Select the NetWare (NCP) tab and verify the settings.
10. Click OK.
❏ Online help
Notes:
❏ The parameter list is described in detail in "Appendix A - Parameter
List " .
If you do not have TCP/IP on your network, follow these steps to install
the StorPoint NAS as an NDS server:
1. Verify that the NDS tree is synchronized.
2. Use a standard text editor such as Notepad to edit the configuration
parameters. From Windows Explorer or File Manager, locate the
StorPoint NAS configuration file,
System/ServerProperties
3. Enter the appropriate settings for these parameters:
Parameter name
[Server]
TimeZone
TimeSyncSource
StorPoint NAS 100 User's Manual
. The Protocols dialog box appears.
is available for all parameters.
config.ini
folder.
Value Description
= Must be set to the correct time zone that the
StorPoint NAS is operating in.
= NDS Set to NDS to enable the StorPoint NAS to get its time
from the NetWare network. Default is NDS.
which is located in the