Front Panel Indicator Conditions - Axis 7100 User Manual

AXIS 7100 User's Manual
FTP

Front Panel Indicator Conditions

Normal Conditions
Follow these steps to restore the default settings using FTP:
1. Log in to the AXIS 7100 with the command
where
address>,
address assigned to your AXIS 7100.
2. You will be prompted for user id and password. Use the user
id , which has the default password
root
3. Issue the command
settings. The unit now restarts automatically.
4. Log out using the command
your FTP version.
The AXIS 7100 will now restart with the factory default settings.
The Power LED is hardware controlled and should always
remain on when power is connected to the AXIS 7100. The
remaining LEDs are all software controlled.
This table shows the front panel indicators during normal
conditions:
Event Status
LED
Power up On
On
Flash
On
Sending On
Idle
On
Flash loading
Yellow
Flash
<Internet address>
to restore the default
get defaults
,
quit bye
Busy LED Network Remarks
LED
On On Initial power to unit
Off Off Memory test
On Off Self test in progress
Off Flash Network LED flashes when net-
work traffic is present
On Flash
Off Flash Network LED flashes when net-
work traffic is present
Blink Blink During Flash loading, the Net-
work LED blinks quickly
Troubleshooting
ftp <Internet
is the name or IP
.
pass
or depending on
exit
141