Table of Contents
Advertisement
Date and Time Commands
SNTP Commands
sntp
Syntax
[no] sntp
Context
config>system>time
Description
This command creates the context to edit the Simple Network Time Protocol (SNTP).
SNTP can be configured in either broadcast or unicast client mode. SNTP is a compact, client-only
version of the NTP. SNTP can only receive the time from SNTP/NTP servers. It cannot be used to
provide time services to other systems.
The system clock is adjusted automatically during system initialization and periodically to ensure that
the local time is close to server's time. However, if the time difference between the SNTP/NTP server
and the system clock is more than 2.5 seconds, the software corrects the system time gradually
adjusted over an interval.
SNTP is created in an administratively enabled state (no shutdown).
The no form of the command removes the SNTP instance and configuration. SNTP does not need to
be administratively disabled when removing the SNTP instance and configuration.
Default
no sntp
broadcast-client
Syntax
[no] broadcast-client
Context
config>system>time>sntp
Description
This command enables listening to SNTP/NTP broadcast messages on interfaces with broadcast
client enabled at global device level.
SNTP must be shutdown prior to changing either to or from broadcast mode.
The no form of the command disables broadcast client mode.
Default
no broadcast-client
server-address
Page 342
Guide
7210 SAS D, E, K OS Basic System Configuration
Hide quick links:
Advertisement
Table of Contents
