Alcatel-Lucent 7210 SAS-D Configuration Manual page 323

description — The description is a user configurable string that can be used to identify the purpose
owner owner — The owner identifies the creator of this alarm. It defaults to "TiMOS CLI". This
Configuration example:
memory-use-alarm
Syntax memory-use-alarm rising-threshold threshold [falling-threshold threshold] interval
seconds [rmon-event-type] [startup-alarm alarm-type]
no memory-use-alarm
Context config>system>thresholds
Description The memory thresholds are based on monitoring the TIMETRA-SYSTEM-MIB sgiMemoryUsed
object. This object contains the amount of memory currently used by the system. The severity level is
Alarm.
The no form of this command removes the configured memory threshold warning.
Parameters rising-threshold threshold — Specifies a threshold for the sampled statistic. When the current
7210 SAS D, E, K OS Basic System Configuration Guide
of this event. This is an optional parameter and can be 80 characters long. If the string contains
special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Default
An empty string.
parameter is defined primarily to allow entries that have been created in the RMON-MIB
alarmTable by remote SNMP managers to be saved and reloaded in a CLI configuration file. The
owner will not normally be configured by CLI users and can be a maximum of 80 characters
long.
Default TiMOS CLI
Default
event 5 rmon-event-type both description "alarm testing" owner "TiMOS CLI"
The absolute sample type method is used.
sampled value is greater than or equal to this threshold, and the value at the last sampling interval
was less than this threshold, a single threshold crossing event will be generated. A single
threshold crossing event will also be generated if the first sample taken is greater than or equal to
this threshold and the associated startup-alarm is equal to rising or either.
System Management
Page 323