Alcatel-Lucent 7210 SAS-D Configuration Manual page 385

ipv6-128bit-match-enable
Syntax [no] ipv6-128bit-match-enable num-resources
Context configure>system>resource-profile>egress-internal-tcam>acl-sap-egress
Description
This command allows the user to allocate maximum resources for use by egress filter policies using
ipv6 criteria with 128-bit IPv6 addresses.
The resources cannot be shared with any other egress filter policies that specify other match crtieria.
Please see the 7210 SAS Router Configuration guide for more information on resource allocation
details and fields available for use.
With the no form of the command, the software does not allocate any resources for use by egress filter
policies using ipv6 criteria with 128-bit IPv6 addresses. If no resources are allocated for use, then the
software fails all attempts to associate a service entity (e.g. SAP, IP interface, etc.) with a filter policy
using this match criteria.
Default no ipv6-128bit-match-enable
Parameters
num-resources — Specifies the maximum amount of resources for use by this filter match criteria.
7210 SAS D, E, K OS Basic System Configuration Guide
Values [0|2]
Default
0
System Management
Page 385