Table 39: Show System Sntp Output Fields - Alcatel-Lucent 7210 SAS-D Configuration Manual

System Commands
===============================================================================
-------------------------------------------------------------------------------
Time Information
-------------------------------------------------------------------------------
Timescale
Current Time
Frequency Traceable : yes
Time Traceable
Time Source
===============================================================================
===============================================================================
A:7210SAS>show>system#
sntp
Syntax sntp
Context show>system
Description This command displays SNTP protocol configuration and state.
Output Show SNTP Output — The following table describes SNTP output fields.

Table 39: Show System SNTP Output Fields

Sample Output
*A:pc-4.0# show system sntp
===============================================================================
SNTP Status
===============================================================================
Admin Status : up
===============================================================================
===============================================================================
SNTP Servers
===============================================================================
Page 426
: PTP
: 2012/12/13 11:05:43 (UTC)
: yes
: GPS
Label
SNTP Server
Version
Preference
Interval
7210 SAS D, E, K OS Basic System Configuration Guide
The SNTP server address for SNTP unicast client mode.
The SNTP version number, expressed as an integer.
Normal — When more than one time server is configured, one
server can be configured to have preference over another.
Preferred — Indicates that this server has preference over another.
The frequency, in seconds, that the server is queried.
Oper Status : up
Description
Mode : broadcast