Alcatel-Lucent 7210 SAS-D Configuration Manual page 106

File Commands
repair
Syntax
Context
Description
Parameters
scp
Syntax
Context
Description
Parameters
Page 106
repair [cflash-id]
file
This command checks a compact flash device for errors and repairs any errors found.
cflash-id — Specify the compact flash slot ID to be shut down or enabled. When a specific cflash-id
is specified, then that drive is shutdown. If no cflash-id is specified, the drive referred to by the cur-
rent working directory is assumed.
Default
The current compact flash device.
Values
cf1:|uf1: - 7210 SAS-E
cf1: - 7210 SAS-D
cf1:|uf1: - 7210 SAS-K
scp local-file-url destination-file-url [router router-instance] [force]
file
This command copies a local file to a remote host file system. It uses ssh for data transfer, and uses
the same authentication and provides the same security as ssh. The following prompt appears:
"Are you sure (y/n)?" The destination must specify a user and a host.
local-file-url — The local source file or directory.
[cflash-id/][file-path]> - [Up to 256 characters]
cflash-id or usb-flash-id -
destination-file-url — The destination file.
user — The SSH user.
host — The remote host IP address of DNS name.
file-path — The destination path.
router-instance — Specify the router name or service ID.
Values
<user>@<hostname>:<file-path> - [255 chars max]
user
7210 SAS D, E, K OS Basic System Configuration Guide
cf1: - 7210 SAS-D
cf1: | uf1: - 7210 SAS-E
cf1: | uf1: - 7210 SAS-K
- [32 chars max]