Alcatel-Lucent 7210 SAS-D Configuration Manual page 343

Syntax server-address ip-address [version version-number] [normal | preferred]
[interval seconds]
no server-address
Context config>system>time>sntp
Description
This command creates an SNTP server for unicast client mode.
Parameters
ip-address — Specifies the IP address of the SNTP server.
version version-number — Specifies the SNTP version supported by this server.
normal | preferred — Specifies the preference value for this SNTP server. When more than one
interval seconds — Specifies the frequency at which this server is queried.
7210 SAS D, E, K OS Basic System Configuration Guide
Values
1 — 3
Default 3
time-server is configured, one server can have preference over others. The value for that server
should be set to preferred. Only one server in the table can be a preferred server.
Default normal
Values
64 — 1024
Default
64
System Management
Page 343