Alcatel-Lucent 7210 SAS-D Configuration Manual page 99

cd
Syntax
Context
Description
Parameters
copy
Syntax
Context
Description
7210 SAS D, E, K OS Basic System Configuration Guide
-r — Clears/resets the read-only attribute on the specified file.
cd [file-url]
file
This command displays or changes the current working directory in the local file system.
file-url — Syntax: [<local-url>|<remote-url> - [255 chars max]
remote-locn - [ <hostname> | <ipv4-address> | "["<ipv6-address>"]" ]
ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
cflash-id or usb-flash-id -
<none> — Displays the current working directory.
.. — Signifies the parent directory. This can be used in place of an actual directory name in a
directory-url.
directory-url — The destination directory.
copy source-file-url dest-file-url [force]
file
This command copies a file or all files in a directory from a source URL to a destination URL. At
least one of the specified URLs should be a local URL. The optional wildcard (*) can be used to copy
multiple files that share a common (partial) prefix and/or (partial) suffix.
When a file is copied to a destination with the same file name, the original file is overwritten by the
new file specified in the operation. The following prompt appears if the destination file already exists:
"Overwrite destination file (y/n)?"
For example:
local-url - [<cflash-id>/ |<usb-flash-id>/][<file-path>]
remote-url - [{ftp://|tftp://}<login>:<pswd>@
<remote-locn>/][<file-path>]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
cf1: - 7210 SAS-D
cf1: | uf1: - 7210 SAS-E
cf1: | uf1: - 7210 SAS-K
Configuration Commands
Page 99