format
Syntax
Context
Description
Parameters
md
Syntax
Context
Description
Parameters
7210 SAS D, E, K OS Basic System Configuration Guide
The exit all command leaves the file system/file operation context and returns to the <ROOT> CLI
context. The state of the present working directory is maintained for the CLI session. Entering the file
command returns the cursor to the working directory where the exit command was issued.
format cflash cflash-id
root>file
Platforms Supported: 7210 SAS-K.
This command formats the compact flash. The compact flash must be shutdown before starting the
format.
cflash-id — The compact flash type.
Values
cf1:|uf1: - 7210 SAS-K
md file-url
file
This command creates a new directory in a file system.
Directories can only be created one level at a time.
file-url — The directory name to be created.
<local-url>|<remote-url> - [255 chars max]
cflash-id or usb-flash-id -
cf1: - 7210 SAS-D
local-url
- [<cflash-id>/ |<usb-flash-id>/][<file-path>]
remote-url
- [ftp://<login>:<pswd>@<remote-locn>/]
[<file-path>]
remote-locn - [ <hostname> | <ipv4-address> |
"["<ipv6-address>"]" ]
ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link
local addresses
cf1: | uf1: - 7210 SAS-E
Configuration Commands
Page 103