Alcatel-Lucent 7210 SAS-D Configuration Manual page 396

System Resource-Profile Commands
Syntax [no] up-mep
Context configure>system>resource-profile>ingress-internal-tcam>eth-cfm
Description
This command provides the context to allocate resources for CFM UP MEPs.
Resources for UP MEPs created on SAP and SDP Bindings are allocated from this pool.
With the no form of the command, the software does not allocate any resources for use by CFM UP
MEPs. If no resources are allocated for use, then software fails all attempts to configure an UP MEP.
NOTE: CFM Down MEPs does not require an explicit resource allocation by the user. Only 7210
SAS-D supports resource allocation for UP MEPs.
Default 0
Parameters
num-resources — Specifies the maximum amount of resources for use by up-mep.
[0..2]
ipv6-ipv4-match-enable
Syntax ipv6-ipv4-match-enable
no ipv6-ipv4-match-enable
Context configure>system>resource-profile>ingress-internal-tcam>qos-sap-ingress-resource
Description User needs to allocate resources from the SAP ingress QoS resource pool for ipv6-criteria by using
the command "configure> system> resource-profile> ingress-internal-tcam> qos-sap-ingress-
resource> ipv6-ipv4-match-enable" before using IPv6 criteria SAP ingress QoS policies.
These resources can be shared with SAP ingress policies that use IPv4 criteria. For more details about
the resource allocation for ingress filter policy and fields available for use with ingress filter policy
please refer the 7210 SAS-DE Router Configuration user guide. For more details about the resource
allocation for SAP ingress QoS policy please refer to 7210 SAS-DE QoS user guide.
With the no form of the command, the software does not allocate any resources for use by ingress
SAP QoS policies using IPv6 criteria. If no resources are allocated for use, then software fails all
attempts to associate a service entity (For example: SAP, IP interface, etc.) with a ingress filter policy
using this match criteria.
Parameters
num-resources — Specifies the maximum amount of resources for use by this SAP ingress Qos policy
match criteria.
max — It is a special keyword. If user specifies max, then the software allocates one chunk when the
Page 396
Guide
first SAP is associated with a SAP ingress QoS policy using this match criteria. It continues to
allocate resources to SAPs associated with SAP ingress QoS policy using this criteria, as long as
the total amount of resources allocated does not exceed the resources allocated to SAP ingress
QoS policies (configured with the command config> system> resource-profile> ingress-internal-
tcam> qos-sap-ingress-resource command) and chunks are available for use.
7210 SAS D, E, K OS Basic System Configuration