Tech-Support; Save - Alcatel-Lucent 7210 SAS-D Configuration Manual

Tech-support

The
tech-support
be used with explicit authorization and direction from Alcatel-Lucent's Technical Assistance
Center (TAC).

Save

The
save
save
not specified, debug configurations are not saved between reboots.
CLI Syntax: admin
Example
The following example displays the
A:ALA-1>admin# save ftp://test:test@192.168.x.xx/./1x.cfg
Writing file to ftp://test:test@192.168.x.xx/./1x.cfg
Saving configuration ...Completed.
ALA-1>admin# debug-save ftp://test:test@192.168.x.xx/./debugsave.txt
Writing file to ftp://julie:julie@192.168.x.xx/./debugsave.txt
Saving debug configuration .....Completed.
A:ALA-1>admin#
7210 SAS D, E, K OS Basic System Configuration Guide
command creates a system core dump. NOTE: This command should only
command saves the running configuration to a configuration file. When the
parameter is specified, debug configurations are saved in the config file. If this parameter is
save [file-url] [detail] [index]
debug-save [file-url]
:
admin# save ftp://test:test@192.168.x.xx/./1.cfg
admin# debug-save debugsave.txt
command results.
save
System Management
debug-
Page 263