Alcatel-Lucent 7210 SAS-D Configuration Manual page 368

System Administration Commands
System Administration Commands
admin
Syntax admin
Context <ROOT>
Description
The context to configure administrative system commands. Only authorized users can execute the
commands in the admin context.
Default none
check-golden-bootstrap
Syntax check-golden-bootstrap
Context admin
Description
Platforms Supported: 7210 SAS-D and 7210 SAS-E.
This command validates the current golden bootstrap image, and displays its version, if found to be
valid. If the golden bootstrap image is not found to be a valid, an error message is displayed to that
effect.
auto-init
Syntax auto-init stop
Context admin
Description
NOTE: This command is not applicable to 7210 SAS-R6 platform.
When the system boots up for the first-time, auto-init can potentially use the Timos images available
on the local flash to boot up and provide a user login prompt. With this command, user is provided
with an option to stop the auto-init process and complete successful boot. After executing this
command, the system saves the BOF with the BOF parameter primary-image pointing to the both.tim
on the local flash.
If the user does not use this command to stop the auto-init process, the system reboots and attempts to
find the BOF again using DHCP.
Default
No default
debug-save
Page 368
Guide
7210 SAS D, E, K OS Basic System Configuration