System Command Reference
Command Hierarchies
Configuration Commands
NOTE: Not all CLI commands are supported on all the 7210 SAS platforms. Some commands are available
only on some platforms. The support for a particular command for a given platform is either stated explicitly
in the command reference OR in the CLI command description, as applicable. User must use both this
information to know if a particular command is available on a particular platform.
•
Configuration Commands on page 279 on page 280
•
System Alarm Commands on page 281
•
PTP Commands on page 325
•
System Time Commands on page 283
•
Cron Commands on page 284
•
System Administration (Admin) Commands on page 286
•
High Availability (Redundancy) Commands on page 330
•
System Alarm Contact Commands on page 287
•
System Synchronization Commands on page 288
•
LLDP System Commands on page 289
•
LLDP Ethernet Port Commands on page 289System Resource-Profile Commands for 7210 SAS-D on
page 290
•
System Resource-Profile Commands for 7210 SAS-D on page 290
•
System Resource-Profile Commands for 7210 SAS-E on page 292
•
System Resource-Profile Commands for 7210 SAS-K on page 291
•
Fan Controller Commands for 7210 SAS-D and 7210 SAS-D ETR variant with 128MB flash on page
293
•
Show Commands on page 294
•
Clear Commands on page 295
•
Debug Commands on page 295
System Information Commands
config
— system
7210 SAS D, E, K OS Basic System Configuration Guide
—
boot-bad-exec
file-url
— no
boot-bad-exec
— boot-good-exec
System Management
Page 279