Alcatel-Lucent 7210 SAS-D Configuration Manual page 70

Monitor CLI Commands
ipv6
Syntax ipv6 ipv6-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>filter
monitor>management-access-filter
Description This command enables IPv6 filter monitoring. The statistical information for the specified IPv6 filter
entry displays at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified IPv6 filter. The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the "rate per second" for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters iv6p-filter-id — Displays detailed information for the specified IPv6 filter ID and its filter entries.
entry entry-id — Displays information on the specified IPv6 filter entry ID for the specified filter ID
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
Sample Output
*A:7210SAS>monitor>filter# ipv6 10 entry 10 interval 3 repeat 3 absolute
===============================================================================
Monitor statistics for IPv6 filter 10 entry 10
===============================================================================
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
Page 70
Values 1 — 65535
only.
Values
1 — 65535
Default 10 seconds
Values 3 — 60
Default
10
Values 1 — 999
of the delta.
7210 SAS D, E, K OS Basic System Configuration Guide