Alcatel-Lucent 7210 SAS-D Configuration Manual page 64

Global Commands
wait milliseconds — The time in milliseconds to wait for a response to a probe, expressed as a
no-dns — When the no-dns keyword is specified, a DNS lookup for the specified host name will not
source ip-address — The source IP address to use as the source of the probe packets in dotted
tos type-of-service — The type-of-service (TOS) bits in the IP header of the probe packets, expressed
router router-instance — Specifies the router name or service ID.
tree
Syntax tree [detail]
Context <GLOBAL>
Description This command displays the command hierarchy structure from the present working context.
Parameters
detail — Includes parameter information for each command displayed in the tree output.
write
Syntax write {user | broadcast} message-string
Context <GLOBAL>
Description
This command sends a console message to a specific user or to all users with active console sessions.
Parameters user — The name of a user with an active console session to which to send a console message.
broadcast — Specifies that the message-string is to be sent to all users logged into the router.
message-string — The message string to send. Allowed values are any string up to 250 characters
Page 64
decimal integer.
Default
5000
Values
1 — 60000
be performed.
Default DNS lookups are performed
decimal notation. If the IP address is not one of the device's interfaces, an error is returned.
as a decimal integer.
Values 0 — 255
Values
router-name:
agement.
service-id:
Default
Base
Values Any valid CLI username
long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
7210 SAS D, E, K OS Basic System Configuration Guide
Base, management (supported only on 7210 SAS-E) ,vpls-man-
1 — 2147483647