Table 44: System Timing Output Fields - Alcatel-Lucent 7210 SAS-D Configuration Manual

Absolute
The following example shows output for time-range associations with previously created IP and
MAC filters.
A:ala# show cron time-range day associations
===============================================================================
Cron time-range associations
===============================================================================
Name
-------------------------------------------------------------------------------
IP Filter associations
-------------------------------------------------------------------------------
IP filter Id
-------------------------------------------------------------------------------
MAC Filter associations
-------------------------------------------------------------------------------
None
-------------------------------------------------------------------------------
Tod-suite associations
-------------------------------------------------------------------------------
Tod-suite : suite_sixteen, for Ingress Qos Policy "1160"
Tod-suite : suite_sixteen, for Ingress Scheduler Policy "SchedPolCust1_Day"
Tod-suite : suite_sixteen, for Egress Qos Policy "1160"
Tod-suite : suite_sixteen, for Egress Scheduler Policy "SchedPolCust1Egress_Day
===============================================================================
uptime
Syntax uptime
Context show
Description
This command displays the time since the system started.
Output Uptime Output — The following table describes uptime output fields.

Table 44: System Timing Output Fields

Sample Output
A:ALA-1# show uptime
System Up Time
A:ALA-1#
7210 SAS D, E, K OS Basic System Configuration Guide
: Start * * * * End * * * *
: day
: 10, entry 1010
Label
System Up Time
: 11 days, 18:32:02.22 (hr:min:sec)
State
Displays the length of time the system has been up in days,
hr:min:sec format.
System Management
: Inactive
Description
Page 441