Configuring Bof Parameters - Alcatel-Lucent 7210 SAS-D Configuration Manual

Configuring BOF Parameters

The following output displays a BOF configuration for 7210 SAS-E:
*A:7210>show# bof
===============================================================================
BOF (Memory)
===============================================================================
primary-image
/I783/STU-sultan
primary-config
secondary-config
#eth-mgmt Port Settings:
no
eth-mgmt-address
eth-mgmt-route
eth-mgmt-route
eth-mgmt-route
eth-mgmt-autoneg
eth-mgmt-duplex
eth-mgmt-speed
#uplinkA Port Settings:
uplinkA-port
uplinkA-address
uplinkA-vlan
uplinkA-route
uplinkA-route
#uplinkB Port Settings:
uplinkB-port
uplinkB-address
uplinkB-vlan
#System Settings:
wait
persist
console-speed
console-disabled
===============================================================================
*A:7210>show#
7210 SAS D, E, K OS Basic System Configuration Guide
ftp://*:*@135.254.170.22//import/panos_builds/nightly/0.0
ftp://*:*@10.135.25.100/tftpboot/STU/2597-ver2.cfg
tftp://10.135.25.100/STU/2597-ver2.cfg
eth-mgmt-disabled
10.135.25.91/24
10.135.0.0/16 next-hop 10.135.25.1
135.250.0.0/16 next-hop 10.135.25.1
135.254.0.0/16 next-hop 10.135.25.1
full
100
1/1/24
10.135.25.91/24
0
10.135.0.0/16 next-hop 10.135.25.1
135.254.0.0/16 next-hop 10.135.25.1
1/1/2
0
0
3
off
115200
Boot Option Files
Page 145