Related Documentation - AudioCodes Mediant 600 User Manual

Related Documentation

SIP CPE Release Notes
Product Reference Manual for SIP CPE Devices
Mediant 600 Installation Manual
Mediant 1000 Installation Manual
CPE Configuration Guide for IP Voice Mail
Note:
Note:
Note:
Note:
Notes:
SIP User's Manual
Manual Name
Throughout this manual, unless otherwise specified, the term device refers to
the Mediant 600 and Mediant 1000 gateways.
Before configuring the device, ensure that it is installed correctly as instructed
in the device's Installation Manual.
For assigning an IP address to the device for initial connectivity, refer to the
Installation Manual.
The terms IP-to-Tel and Tel-to-IP refer to the direction of the call relative to
the device. IP-to-Tel refers to calls received from the IP network and destined
to the PSTN/PBX (i.e., telephone connected directly or indirectly to the
device); Tel-to-IP refers to calls received from the PSTN/PBX and destined
for the IP network.
•
FXO (Foreign Exchange Office) is the interface replacing the analog
telephone and connects to a Public Switched Telephone Network (PSTN)
line from the Central Office (CO) or to a Private Branch Exchange (PBX).
The FXO is designed to receive line voltage and ringing current, supplied
from the CO or the PBX (just like an analog telephone). An FXO VoIP
device interfaces between the CO/PBX line and the Internet.
•
FXS (Foreign Exchange Station) is the interface replacing the Exchange
(i.e., the CO or the PBX) and connects to analog telephones, dial-up
modems, and fax machines. The FXS is designed to supply line voltage
and ringing current to these telephone devices. An FXS VoIP device
interfaces between the analog telephone devices and the Internet.
20
Mediant 600 & Mediant 1000
Document #: LTRT-83308