SIP User's Manual
3.3.2.13 IP Media
3.3.2.13.1 Configuring the IP Media Parameters
The 'IP Media Settings' page allows you to configure IP media parameters. For a
description of these parameters, see ''Configuration Parameters Reference'' on page 501.
Note:
To configure the IP media parameters:
1.
Open the 'IP Media Settings' page (Configuration tab > VoIP menu > IP Media
submenu > IP Media Settings).
2.
Configure the parameters as required.
3.
Click the Submit button to save your changes.
4.
To save the changes to flash memory, see ''Saving Configuration'' on page 197.
Version 6.2
This page is applicable only to Mediant 1000. This page appears only if your
device is installed with the relevant Software Upgrade Key (see ''Loading
Software Upgrade Key'' on page 201).
Figure 3-124: IP Media Settings Page
193
3. Web-Based Management
February 2011