Manipulating Number Prefix - AudioCodes Mediant 600 User Manual

Voip media gateways sip protocol
Hide thumbs Also See for Mediant 600:
Table of Contents

Advertisement

SIP User's Manual
The 'Dest. Phone Prefix' field is set to the value "LONG" and this rule is assigned
to a long distance Trunk Group (e.g. Trunk Group ID 2).
Figure 8-12: Configuring Dial Plan File Label for IP-to-Tel Routing
The above routing rules are configured to be performed before manipulation
(described in the step below).
4.
Configure manipulation in the 'Destination Phone Number Manipulation Table for IP to
Tel Calls' table (Configuration tab > VoIP menu > GW and IP to IP submenu >
Manipulations submenu > Dest Number IP->Tel) for removing the first four
characters of the called party number "tag" (in our example, "LOCL" and "LONG"):
The 'Destination Prefix' field is set to the value "LOCL" and the 'Stripped Digits
From Left' field is set to '4'.
The 'Destination Prefix' field is set to the value "LONG" and the 'Stripped Digits
From Left' field is set to '4'.
Figure 8-13: Configuring Manipulation for Removing Label
8.3.2

Manipulating Number Prefix

The device supports a notation for adding a prefix where part of the prefix is first extracted
from a user-defined location in the original destination or source number. This notation is
entered in the 'Prefix to Add' field in the Number Manipulation tables (see ''Manipulation'' on
page 145):
x[n,l]y...
where,
x = any number of characters/digits to add at the beginning of the number (i.e. first
digits in the prefix).
[n,l] = defines the location in the original destination or source number where the digits
y are added:
n = location (number of digits counted from the left of the number) of a specific
string in the original destination or source number.
l = number of digits that this string includes.
y = prefix to add at the specified location.
For example, assume that you want to manipulate an incoming IP call with destination
number +5492028888888 (area code 202 and phone number 8888888) to the number
0202158888888. To perform such a manipulation, the following configuration is required in
the Number Manipulation table:
1.
The following notation is used in the 'Prefix to Add' field:
0[5,3]15
Version 6.2
275
8. IP Telephony Capabilities
February 2011

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediant 1000

Table of Contents