Figure 3-128: Load Auxiliary Files - AudioCodes Mediant 600 User Manual

The auxiliary files can be loaded to the device using the Web interface's 'Load Auxiliary
Files' page, as described in the procedure below.

To load an auxiliary file to the device using the Web interface:
1. Open the 'Load Auxiliary Files' page (Maintenance tab > Software Update menu >
Load Auxiliary Files).
Note:
2. Click the Browse button corresponding to the file type that you want to load, navigate
to the folder in which the file is located, and then click Open; the name and path of the
file appear in the field next to the Browse button.
3. Click the Load File button corresponding to the file you want to load.
4. Repeat steps 2 through 3 for each file you want to load.
5. Save the loaded auxiliary files to flash memory, see ''Saving Configuration'' on page
197 and reset the device (if you have loaded a Call Progress Tones file), see
''Resetting the Device'' on page 195.
SIP User's Manual
Figure 3-128: Load Auxiliary Files Page
The appearance of certain file load fields depends on the installed Software
Upgrade Key.
200
Mediant 600 & Mediant 1000
Document #: LTRT-83308