SIP User's Manual
2.
Click OK
3.
Click the
confirmation for deletion.
Figure 3-20: Message Box for Confirming Scenario Deletion
4.
Click OK ; the Scenario is deleted and the Scenario mode closes.
Note:
3.1.8.7
Exiting Scenario Mode
When you want to close the Scenario mode after using it for device configuration, follow the
procedure below:
To close the Scenario mode:
1.
Simply click any tab (besides the Scenarios tab) on the Navigation bar, or click the
Cancel Scenarios
appears, requesting you to confirm exiting Scenario mode, as shown below.
Figure 3-21: Confirmation Message Box for Exiting Scenario Mode
2.
Click OK to exit.
Version 6.0
; the Scenario mode appears in the Navigation tree.
Delete Scenario File
You can also delete a Scenario using the following alternative methods:
•
Loading an empty
page
42
).
•
Loading an ini file with the ScenarioFileName parameter set to no value
(i.e., ScenarioFileName = "").
button located at the bottom of the Navigation tree; a message box
button; a message box appears requesting
dat file (refer to ''Loading a Scenario to the Device''
43
3. Web-Based Management
March 2010
on