Web Parameters - AudioCodes Mediant 600 User Manual

Voip media gateways sip protocol
Hide thumbs Also See for Mediant 600:
Table of Contents

Advertisement

13.2.2 Web Parameters

The Web parameters are described in the table below.
Parameter
[DisableWebTask]
[HTTPport]
EMS: Disable WEB Config
[DisableWebConfig]
[ResetWebPassword]
[ScenarioFileName]
SIP User's Manual
Table 13-11: Web Parameters
Disables or enables device management through the Web interface.
[0] = Enable Web management (default).
[1] = Disable Web management.
Note: For this parameter to take effect, a device reset is required.
HTTP port used for Web management (default is 80).
Note: For this parameter to take effect, a device reset is required.
Determines whether the entire Web interface is in read-only mode.
[0] = Enables modifications of parameters (default).
[1] = Web interface in read-only mode.
When in read-only mode, parameters can't be modified. In addition, the
following pages can't be accessed: 'Web User Accounts', 'Certificates',
'Regional Settings', 'Maintenance Actions' and all file-loading pages
('Load Auxiliary Files', 'Software Upgrade Wizard', and 'Configuration
File').
Notes:
For this parameter to take effect, a device reset is required.
To return to read/write after you have applied read-only using this
parameter (set to 1), you need to reboot your device with an ini file
that doesn't include this parameter, using the BootP/TFTP Server
utility (refer to the Product Reference Manual).
Resets the username and password of the primary and secondary
accounts to their defaults.
[0] = Password and username retain their values (default).
[1] = Password and username are reset (for the default username
and password, see User Accounts).
Notes:
For this parameter to take effect, a device reset is required.
The username and password cannot be reset from the Web interface
(i.e., via AdminPage or by loading an ini file).
Defines the file name of the Scenario file to be loaded to the device. The
file name must have the *.dat extension and can be up to 47 characters.
For loading a Scenario using the Web interface, see Loading a Scenario
to the Device on page 46.
514
Mediant 600 & Mediant 1000
Description
Document #: LTRT-83308

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediant 1000

Table of Contents