Figure 5-7 Set Up A Tftp Upgrade Environment - H3C LS8M1WCMA0-OVS Installation Manual

Access controller module

Hide thumbs Also See for LS8M1WCMA0-OVS:

Table of Contents

Installation Manual

H3C LS8M1WCMA0-OVS Access Controller Module

Figure 5-7 Set up a TFTP upgrade environment

Connect the 10/100 BASE-TX out-of-band management interface to a PC with a

crossover cable. Start the TFTP server on the PC, and set the TFTP server path to the

directory of the application program.

Caution:

The TFTP server is not provided with H3C LS8M1WCMA0-OVS service cards. You

need to purchase and install it yourself.

Step 2: Modify Ethernet interface parameters. Refer to section 5.5.1 "Configuring

Ethernet Interface Parameters" on page 5-13 for details.

Step 3: After the above configuration, select 3 in the BootWare main menu to enter the

Ethernet submenu. In the following example, select 2 to upgrade the main application

file.

Starting the TFTP download.................................Done

Please input file name(Press 'Enter' use default name):

After the download is done, enter the file name to start upgrade.

..........................................................................

..............................

Writing into Flash Succeeds.

Step 4: Select 0 to return to the BoorWare main menu. Select 1 to boot the system.

Chapter 5 Software Maintenance

5-15

Table of Contents