Specifying An Ip Address For An - H3C WX Series Getting Started Manual

wlan rrm
dot11a mandatory-rate 6 12 24
dot11a supported-rate 9 18 36 48 54
dot11b mandatory-rate 1 2
dot11b supported-rate 5.5 11
dot11g mandatory-rate 1 2 5.5 11
dot11g supported-rate 6 9 12 18 24 36 48 54
interface NULL0
interface Vlan-interface1
ip address 192.168.0.100 255.255.255.0
interface GigabitEthernet1/0/1
interface GigabitEthernet1/0/2
interface GigabitEthernet1/0/3
interface GigabitEthernet1/0/4
interface Ten-GigabitEthernet1/0/5
load xml-configuration
user-interface con 0
user-interface vty 0 4
authentication-mode scheme
user privilege level 3
Besides the default configurations, you need to perform the following configurations to use an AC in
your network:
Specifying an IP Address for an AC
Configuring WLAN Service
Saving the Current Configuration
Specifying an IP Address for an AC
Follow these steps to specify an IP address for the AC:
To do...
Enter system view
Create VLANs
Create a VLAN interface
and enter VLAN
interface view
Assign an IP address to
the VLAN interface
Field
Use the command...
system-view
vlan { vlan-id1 [ to
vlan-id2 ] | all }
interface
vlan-interface
vlan-interface-id
ip address ip-address
{ mask | mask-length }
The default 802.11a/b/g settings are as shown on the
left column.
The default rates depend on your AC model.
The interface type supported by the AC.
By default, the default IP address of VLAN-interface 1 is
192.168.0.100, and the subnet mask is 255.255.255.0.
The interface type supported by the AC.
Support for the interface types depends on the AC
model.
The AC loads the configuration file with extension .xml
after startup.
The AC supports console and VTY user interfaces. By
default, the authentication mode for VTY login is AAA,
and the user privilege level is 3.
—
Optional
Using this command can create multiple VLANs in
batches.
Required
If the VLAN interface already exists, you enter its view
directly.
If the VLAN interface does not exist, you need to
create a VLAN and then enter VLAN interface view.
Required
IP address 192.168.0.100 is assigned to VLAN interface 1
by default. No IP address is configured for other VLAN
interfaces.
5-3
Description
Remarks