Changing The Video Layout During A Video Call - RADVision SCOPIA XT5000 Series User Manual

Figure 7-7
•
Figure 7-8
Seeing two images side by side and at the same size in one monitor is called PaP (Picture and
Picture) view. See
You can use PIP or PaP views only if your system administrator has configured them in your XT
Codec Unit.

Changing the Video Layout During a Video Call

During the call, you can change your monitor's current layout to best serve your purpose.
You can also change the default layout activated every time your XT Series is connected,
disconnected or when content is shared.
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
Presentation on HD1, and menu, received video, and local video on
Configuring to HD1 (Video Rx) + HD2 (Menu & Present). See
shows the received video. HD2 shows the system menus, the presentation (local or remote) if
available, and the local camera image in a small overlapping window.
Received video on HD1 and local video, presentation, and menu on
Figure 7-3 on page 36
HD2
Figure 7-8 on page
HD2
for a picture of the PaP view.
39. HD1
Managing Calls and Videoconferences | 39