Changing The Video Layout During The Call - RADVision Scopia XT4000 Series User Manual

During a call, you can also define the relative size of the windows. For example, two images
side by side and at the same size in one monitor is called PaP (Picture and Picture) view. For
more information, see
Note
You can use PIP, PaP or PoP views only if your system administrator has configured them in
your XT Codec Unit.
Note
When there is no call, you can reset the monitors to the default configuration by pressing
and then 0 on the XT Remote Control Unit.

Changing the Video Layout During the Call

A video layout is the arrangement of participant images as they appear on the monitor in a
videoconference. If the meeting includes a presentation, a layout can also refer to the
arrangement of the presentation image together with the meeting participants.
During the call, you can change your monitor's current layout to the options described in
Table 3-6 on page
For more information about video layouts in point-to-point calls, see
on page
Note
You can use PIP, PaP or PoP views only if your system administrator has configured them in
your XT Codec Unit.
You can change the layout in one of the following ways:
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1
"Changing the Video Layout During the Call" on page
44.
39.
•
Press the Layouts
the full screen, PoP, PaP, and PiP video layouts, described in
Table 3-6 Video layout options
Layout
Fullscreen
PoP
key on the XT Remote Control Unit repeatedly to switch between
Description
The full screen view shows one video image. Typically, the
remote presentation is displayed, or, if there is no
presentation, the remote video.
The PoP (Picture out Picture) view shows up to three images
of different size, presented side by side. The image on the
left is larger, with two smaller images on the right.
44.
"About Video Layouts"
Table 3-6 on page 44.
Making Point-to-Point Video Calls | 44