Changing The Video Layout During The Call - RADVision SCOPIA XT4000 Series User Manual

For information about setting the system to answering calls automatically, see
Answering Preferences" on page

Changing the Video Layout During the Call

During the call, you can change your monitor's current layout. To change the video layout for
all participants when you are hosting a videoconference from a SCOPIA XT Series MCU Edition,
see
For more information about video layouts in point-to-point calls, see
on page
You can change the layout as follows:
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.1
•
To reject the call and set the system to automatically reject all further incoming calls
without asking any more, select the Do not disturb option on the screen by pressing the
right arrow key twice and
•
Disconnect the call by pressing
Confirm disconnection, press
page 25 for details).
"Changing the Video Layout from the SCOPIA XT Series MCU Edition" on page
38.
•
To change the position of a PIP view on the monitor, show a PaP or PoP view, or display a
full screen view of one of the images, press
•
When you are in PIP, Pap or PoP view, you can change its content by pressing
repeatedly.
•
When you are in full presentation view, you can change its content by pressing
repeatedly.
•
During a call, press
49).
Use the arrows to browse through the layouts
desired layout.
on the XT Remote Control Unit.
on the XT Remote Control Unit. If your system is set to
to confirm (see
24.
and select Layouts from the In-call menu
Figure 5-6 In-Call menu
(Figure 5-7 on page
"Confirming Call Disconnections" on
"About Video Layouts"
repeatedly.
(Figure 5-6 on page
50), and select the
"Setting Call
52.
Making Calls | 49