Making Calls; Making A Call; Dialing A New Number - RADVision SCOPIA XT4000 Series User Manual

6

Making Calls

You can make a video call on the SCOPIA XT Series in several ways. This chapter outlines how
to dial to other endpoints in different modes, and how to answer and terminate a call.

Making a Call

You can make a call by performing one of these actions:

Dialing a New Number

Perform the procedure in this section to dial a number for the first time.
You can change these default call settings:
After you dial a number, it is listed in the list of dialed numbers.
If you manage your SCOPIA XT Series remotely using web interface, you can dial a number
remotely by accessing the web interface and navigating to Make your call > Direct call >
Basic options.
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0
•
Making a Call ................................................................................ page 29
•
Answering a Video Call ..................................................................... page 31
•
Ending a Call ................................................................................ page 32
•
Dialing a New Number ..................................................................... page 29
•
Redialing the Number ...................................................................... page 30
•
Dialing from the Phonebook ............................................................... page 31
•
Call protocol—Choose the protocol: H.323, SIP or ISDN.
•
Call rate—By default, the system uses the maximum available bandwidth.
•
Call type—Choose the call type: Audio-Video or Audio.
Making Calls | 29